Nailstrip Metal Cladding

nailstrip panel system

NAILSTRIP

Nailstrip offers a cost-effective solution to the raised vertical seam metal cladding offering. Nailstrip is simple to install using a continuous fixing strip that requires no clips or mechanical seam closing.  It is an ideal choice for owner builders, cladding beginners or those wanting a no-fuss alternative with an architectural finish to be envied.

Nailstrip panels can be laid vertically and horizontally, in fixed widths, or random patterns. This versatile metal cladding panel continues to impress due to its striking, yet cost-effective installation.

Product Highlights

  • Non-combustible metal cladding and roofing profile, our recommendation is for Nailstrip to be used as wall cladding only
  • Versatile design and install options available
  • Defined finish with concealed fixings
  • Fast and effective installation method
  • No specialist tools required
non-combustible nailstrip cladding

Product Specifications

Panel Heights available25mm and 38mm panel heights available
Length of PanelPanel lengths available from a minimum 500mm, dependant on material selection recommended maximum 4000mm*
Cover Widths available165mm – 490mm pan widths from rib to rib (material dependant)  
Substrate RequirementsSubstrate options available for wall and roof applications *
Tolerance (mm)Sheet length: +/- 7mm and Covering width: +/- 7mm
Stop End and/or HookRecommended by ACS
Fire Rated/BAL ApplicationsSuitable for use in fire-rated and BAL applications in conjunction with a suitable wall/roof build-up *

* Note: For further information and expert advice please contact Architectural Cladding Suppliers.

Technical Support

Architectural Cladding Suppliers are here to help you. We can manufacture and provide everything that is required to complete your project from our cladding profiles, to all the associated accessories and flashings via our sister company, PPC Flashings. For further information or support with flashings please contact the PPC Flashings team.

As every architectural project is different, if you require custom advice, we can discuss your project specifications and will work with you to fabricate to your individual requirements. For any further technical support please contact Architectural Cladding Suppliers.

Nailstrip Metal Cladding

Installation

Architectural Cladding Suppliers cannot guarantee that your metal panels will not experience the effects of what is commonly referred to as oil canning. Oil canning can occur on all types of metal and is not considered a panel defect. For more information please refer to our article on oil canning.

ACS recommends installing a “breathable vapour” membrane to act as a second line of defence to stop any water ingress as well as allowing the building to “breathe”. Any flashings required can be sourced from PPC Flashings.

Stop ends and/or hooks to each panel are highly recommended by Architectural Cladding Suppliers. If you are unsure, please contact us prior to ordering.

Do not continue if the installation does not seem right, contact Architectural Cladding Suppliers.

Nailstrip Metal Cladding

Nailstrip Profile

Nailstrip Metal Cladding
Nailstrip Metal Cladding

Nailstrip Data Sheet

Nailstrip Metal Cladding

Nailstrip Order Form

GENERAL DISCLAIMER:

Architectural Cladding Suppliers recommend that any of our cladding products are installed by a qualified and experienced cladding installer for best results. The information on this page along with all downloads – is to be used as a guide only and for further technical support or advice, please contact our cladding team, prior to placing your order or any installation works.

Explore our Range

NEED MORE INFORMATION

Speak with the ACS project team to learn more about our architectural cladding profiles, finishes, performance, installation process, technical information, price, and any general metal cladding questions you may have.